Reciprocal dry sliding wear behaviour of B4Cp reinforced aluminium alloy matrix composites

Manuscript DraftIn the present work, AlSi9Cu3Mg alloy matrix composites reinforced with 15 and 19% (vol.) B4Cp were produced by squeeze casting route at 850 °C under low vacuum. Titanium-containing flux (K2TiF6) was used to promote the wetting between B4C and liquid aluminium metal. It was found, from the microstructural observations, that the wetting improved by the formation of a thin Ti-rich reaction layer. In order to investigate the wear properties, the samples were subjected to reciprocating wear tests against AISI 4140 pin under dry sliding conditions. Effect of B4C volume fraction, sliding velocity, applied load and sliding distance on reciprocal dry wear behaviour of composites was studied using general full factorial experimental design. Effects of factors and interactions on the coefficient of friction (COF) and the wear rate values of both composite specimens and counter materials were studied. Worn surfaces and wear debris were characterised using field emission gun scanning electron microscope (FEG-SEM), Energy Dispersive X-Ray Spectroscopy (EDS), optical microscope (OM) and XRay diffraction (XRD). From microstructural investigations, wear mechanism suggested as a combination of adhesive, abrasive, and delamination wear.This study was partially supported by TUBITAK (The Scientific and Technological Research Council of Turkey) under Grant No. 107M338. The authors would also like to thank for their kind help to Prof. O. Keles from Istanbul Technical University for experimental design studies, and Prof. J. Gomes and Mr. S. Carvalho from University of Minho for tribological studies

A telerehabilitation system based on wireless motion capture sensors

The constant growth of the elderly population in the world creates new challenges and opportunities in health care systems. New technological solutions have to be found in order to meet the needs and demands of our aging society. The welfare and quality of life of the elderly population must be a priority. Continuous physical activity will play an important role, due to the increase of the retirement age. However, physiotherapy can be expensive, even when the desire movements are autonomous and simple, also requires people to move to rehabilitation centres. Within this context, this paper describes the development and preliminary tests of a wireless sensor network, based on wearable inertial and magnetic sensors, applied to the capture of human motion. This will enable a personalized home-based rehabilitation system for the elderly or people in remote physical locations.Project “AAL4ALL”, co-financed by the European Community Fund FEDER through COMPETE – Programa Operacional Factores de Competitividade (POFC).FCT – Foundation for Science and Technology – Lisbon, Portugal, through project PEst-C/CTM/LA0025/2013

Effects of dual-task interventions on gait performance of patients with parkinson’s disease: a systematic review

OBJECTIVE: Parkinson’s disease is characterized by motor and non-motor symptoms that impair patients’ gait performance, especially while performing dual/concurrent tasks. These deficits impair patients’ daily function, because dual-tasking is a crucial ability in terms of everyday living. The aim of this study was to systematically review the effects of dual task interventions on gait performance of patients with Parkinson’s disease. METHOD: Studies were retrieved from MEDLINE/PubMed, LILACS and SciELO. We used the PICOS strategy to determine eligibility criteria. The search strategy included an advanced search on the included databases, using the following search query: “Parkinson’s Disease” AND “Double Task” OR “Concurrent Tasks” OR “Gait” AND “Walk”. Study selection was carried out by two independent researchers and a third one was called when consensus was needed. RESULTS: A total of 188 articles were identified: 169 articles from Medline/PubMed, 10 articles in SciELO, 8 articles in LILACS and 1 item from manual searches. A total of 56 articles were analyzed regarding the eligibility and exclusion criteria based on full text. A final total of 7 studies were included in the systematic review. CONCLUSION: The different types of dual-task interventions reported (dance, sound stimuli, visual and somatosensory) were associated to improvements in several gait performance indicators of Parkinson’s disease patients, including gait speed, stride time and length, cadence and step length. External stimuli seem to play a critical role on specific training effects on dual-task gait performance.info:eu-repo/semantics/publishedVersio

Evaluation of linear classifiers on articles containing pharmacokinetic evidence of drug-drug interactions

Background. Drug-drug interaction (DDI) is a major cause of morbidity and mortality. DDI research includes the study of different aspects of drug interactions, from in vitro pharmacology, which deals with drug interaction mechanisms, to pharmaco-epidemiology, which investigates the effects of DDI on drug efficacy and adverse drug reactions. Biomedical literature mining can aid both kinds of approaches by extracting relevant DDI signals from either the published literature or large clinical databases. However, though drug interaction is an ideal area for translational research, the inclusion of literature mining methodologies in DDI workflows is still very preliminary. One area that can benefit from literature mining is the automatic identification of a large number of potential DDIs, whose pharmacological mechanisms and clinical significance can then be studied via in vitro pharmacology and in populo pharmaco-epidemiology. Experiments. We implemented a set of classifiers for identifying published articles relevant to experimental pharmacokinetic DDI evidence. These documents are important for identifying causal mechanisms behind putative drug-drug interactions, an important step in the extraction of large numbers of potential DDIs. We evaluate performance of several linear classifiers on PubMed abstracts, under different feature transformation and dimensionality reduction methods. In addition, we investigate the performance benefits of including various publicly-available named entity recognition features, as well as a set of internally-developed pharmacokinetic dictionaries. Results. We found that several classifiers performed well in distinguishing relevant and irrelevant abstracts. We found that the combination of unigram and bigram textual features gave better performance than unigram features alone, and also that normalization transforms that adjusted for feature frequency and document length improved classification. For some classifiers, such as linear discriminant analysis (LDA), proper dimensionality reduction had a large impact on performance. Finally, the inclusion of NER features and dictionaries was found not to help classification.IU -Indiana Universit

Stacked Denoising Autoencoders and Transfer Learning for Immunogold Particles Detection and Recognition

In this paper we present a system for the detection of immunogold particles and a Transfer Learning (TL) framework for the recognition of these immunogold particles. Immunogold particles are part of a high-magnification method for the selective localization of biological molecules at the subcellular level only visible through Electron Microscopy. The number of immunogold particles in the cell walls allows the assessment of the differences in their compositions providing a tool to analise the quality of different plants. For its quantization one requires a laborious manual labeling (or annotation) of images containing hundreds of particles. The system that is proposed in this paper can leverage significantly the burden of this manual task. For particle detection we use a LoG filter coupled with a SDA. In order to improve the recognition, we also study the applicability of TL settings for immunogold recognition. TL reuses the learning model of a source problem on other datasets (target problems) containing particles of different sizes. The proposed system was developed to solve a particular problem on maize cells, namely to determine the composition of cell wall ingrowths in endosperm transfer cells. This novel dataset as well as the code for reproducing our experiments is made publicly available. We determined that the LoG detector alone attained more than 84\% of accuracy with the F-measure. Developing immunogold recognition with TL also provided superior performance when compared with the baseline models augmenting the accuracy rates by 10\%

Design and implementation of a wireless sensor network applied to motion capture

This paper describes the development of a wireless sensor network prototype and its application in a motion capture system based on inertial and magnetic sensors. The system presents a portable and modular architecture and allows the monitoring of several users at the same time using a single wireless network. The target application requires the wireless sensor network to operate efficiently under high loads, since it generates data intensive traffic and needs to support a high number of sensor modules. Other requirements imposed by the application are real-time operation and reliable data delivery. In order to provide the quality of service required by the application, an enhanced version of the LPRT medium access control protocol was developed and implemented in devices compliant with the IEEE 802.15.4 standard at the physical layer. Simulation results show that the proposed modifications improve the performance of the protocol. The implementation of the protocol is validated through the experimental results presented.Fundação para a Ciência e a Tecnologia (FCT) - projeto PTDC/EEA-TEL/68625/2006

αvβ3 and α5β1 integrin-specific ligands: From tumor angiogenesis inhibitors to vascularization promoters in regenerative medicine?

Integrins are cell adhesion receptors predominantly important during normal and tumor angiogenesis. A sequence present on several extracellular matrix proteins composed of Arg-Gly-Asp (RGD) has attracted attention due to its role in cell adhesion mediated by integrins. The development of ligands that can bind to integrins involved in tumor angiogenesis and brake disease progression has resulted in new investigational drug entities reaching the clinical trial phase in humans. The use of integrin-specific ligands can be useful for the vascularization of regenerative medicine constructs, which remains a major limitation for translation into clinical practice. In order to enhance vascularization, immobilization of integrin-specific RGD peptidomimetics within constructs is a recommended approach, due to their high specificity and selectivity towards certain desired integrins. This review endeavours to address the potential of peptidomimetic-coated biomaterials as vascular network promoters for regenerative medicine purposes. Clinical studies involving molecules tracking active integrins in cancer angiogenesis and reasons for their failure are also addressed.Prémios Santa Casa Neurociências - Prize Melo e Castro for Spinal Cord Injury Research; Portuguese Foundation for Science and Technology [Doctoral fellowship (PD/BDE/127835/2016) to L. A. Rocha; IF Development Grant to A. J. Salgado; national funds through grant TUBITAK/0007/2014]. This article has been developed under the scope of the projects NORTE-01-0145-FEDER-000013, supported by the Northern Portugal Regional Operational Programme (NORTE 2020), under the Portugal 2020 Partnership Agreement, through the European Regional Development Fund (FEDER); This work has been funded by FEDER funds, through the Competitiveness Factors Operational Programme (COMPETE), and by National funds, through the Foundation for Science and Technology (FCT), under the scope of the project POCI-01-0145-FEDER-007038info:eu-repo/semantics/publishedVersio

Printing Technologies on Flexible Substrates for Printed Electronics

Printing technologies have been demonstrated to be highly efficient and compatible with polymeric materials (both inks and substrates) enabling a new generation of flexible electronics applications. Conductive flexible polymers are a new class of materials that are prepared for a wide range of applications, such as photovoltaic solar cells, transistors molecular devices, and sensors and actuators. There are many possible printing techniques. This chapter provides an opportunity to review the most common printing techniques used at the industrial level, the most commonly used substrates and electronic materials, giving an overall vision for a better understanding and evaluation of their different features. Several technological solutions (contact/noncontact) and its critical challenges are also presented. Inkjet Printing Technology (IPT) has been receiving a great attention and therefore higher focus is given to this technology. An overview of IPT is presented to evidence its importance and potential as a key-technology on the research field for printed electronics development, as well as on large scale industrial manufacturing. A background and a review on prior work are presented along with used materials, developed applications and potential of IPT technology. The main features of the different printing technologies, advantages and main challenges are also compared

Experimental study on RSS based indoor positioning algorithms

This work compares the performance of indoor positioning systems suitable for low power wireless sensor networks. The research goal is to study positioning techniques that are compatible with real-time positioning in wireless sensor networks, having low-power and low complexity as requirements. Map matching, approximate positioning (weighted centroid) and exact positioning algorithms (least squares) were tested and compared in a small predefined indoor environment. We found that, for our test scenario, weighted centroid algorithms provide better results than map matching. Least squares proved to be completely unreliable when using distances obtained by the one-slope propagation model. Major improvements in the positioning error were found when body influence was removed from the test scenario. The results show that the positioning error can be improved if the body effect in received signal strength is accounted for in the algorithms.Helder D. Silva is supported by the Portuguese Foundation for Science and Technology under the grant SFRBD/78018/2011.info:eu-repo/semantics/publishedVersio

Efeito da aplicação de produtos enológicos na eliminação de Aflatoxinas em vinho branco

As aflatoxinas, quimicamente definidas como difuranocumarinas, são metabolitos secundários produzidos principalmente pelas espécies Aspergillus flavus e Aspergillus parasiticus. O presente trabalho teve como objetivo estudar a ação de diferentes tipos de produtos enológicos na remoção de aflatoxinas (B1 e B2) presentes no vinho. A eficácia desses produtos na remoção das referidas micotoxinas foi avaliada utilizando vinho artificialmente contaminado com AFB1 e AFB2. O produto enológico que mostrou ser mais eficaz na remoção destas micotoxinas foi a bentonite, com percentagem de remoção de 100%. O caseinato de potássio também se mostrou eficaz, com percentagem de remoção na ordem dos 70 a 80%. Adicionalmente também se avaliou o impacto destes produtos enológicos sobre as características físico-químicas dos vinhos. Os resultados obtidos podem fornecer informações úteis para o sector vitivinícola, na seleção do produto enológico mais apropriado na remoção das aflatoxinas, reduzindo a toxicidade e melhorando simultaneamente a qualidade e segurança alimentar do vinho